-11%

Kingston 4GB DDR3 1600 MHz RAM

৳ 3,500.00 ৳ 3,100.00

Avaibility: Out of Stock
  • Model: Kingston 4GB DDR3 1600 MHz RAM
  • Capacity- 4GB
  • 800MHz fCK for 1600Mb/sec/pin
  • 8 independent internal bank
  • CAS Latency: 11, 10, 9, 8, 7, 6
Avaibility: Out of Stock
Share:

Out of stock

Description :

Kingston 4GB DDR3 1600 MHz RAM
This document describes ValueRAM’s 512M x 64-bit (4GB)
DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 512M x 8-bit FBGA components. The
SPD is programmed to JEDEC standard latency DDR3-1600
timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
contact fingers.
Specification :
JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL – 2, or CL – 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), single sided component

There are no reviews yet.

Be the first to review “Kingston 4GB DDR3 1600 MHz RAM”

Your email address will not be published. Required fields are marked *